Xcalibur CUT-40P Plasma Cutter
- Air plasma
- Uses a Euro connector type torch
- 6m cable assembly
- Thermal/current protection
- IGBT technology
- Pilot Arc start
- Grid cutting function
- 15 mm Cut
Why buy a
Xcalibur CUT-40P Plasma Cutter
The Xcalibur CUT-40P Air Plasma machine uses a Euro connector type torch and to achieve the highest quality performance potential. The CUT-40P machine has a 6 metre cable assembly and protection circuits in the event of over heating or if the air plasma machine develops an over current. In addition, if there are any air pressure torch problems the warning indicators will alert the operator immediately.
This inverter has up-to-date digital control technology and its design provides a varied input voltage of 110V AC and 230V AC. Also included is a pilot arc start and a grid cutting function.
Xcalibur CUT-40P Plasma Cutter
Specification
|
Cutting Current Range
|
20-40 amps
|
|
Max Thickness (Carbon Steel)
|
15mm 110V 20mm 230V
|
|
No Load Voltage
|
380 DC
|
|
Quality Thickness
|
12mm 110V 20mm 230V
|
|
Rated Input Power
|
3.44kW 110v 4.63kW 230V
|
|
Input Voltage
|
110V AC 50/60Hz 230V AC 50/60Hz
|
|
Duty Cycle (10 min-40 deg. cel.)
|
30A@35% 40A@40%
|
|
Protection Class
|
IP 23S
|
|
Weight Kg
|
12.6
|
|
Dimensions mm
|
430 x 170 x 270
|