CEBORA PLASMA PROF 163 ACC
Call Now For Best Prices 01276 505012
The CEBORA PLASMA CUTTER: PLASMA PROF 163 ACC three-phase “chopper” multi-voltage power source of 160A @ 40% provides recommended thickness, for the best compromise between cutting quality and productivity of 40 mm; the maximum thickness of 45 mm and the severance thickness of 50 mm. The maximum piercing thickness of 20 mm.
Abnormalities can be detected and safety stop kicks in due to the continuous monitoring of the supply voltage. A handy display informs of the cutting current and nozzle diameter. Software can be updated as needed through the RS232 port.
– Air pressure adjustment and test and optimal pressure display, according to the cutting current and to the torch length, on the front panel.
– “Post-gas” function which, by cooling the torch after arc shut-off, reduces stress on the components and extends the life-span of consumables. Also has a reduced electrode-nozzle wear.
– Central torch adapter with safety protection, to avoid accidental contact with the power parts.
– Explosion-proof protection of the air reducer unit.
Complies with EN 61000 – 3 – 12
Comes Complete with Earth Lead.
6 METER AND 12 METER HAND TORCH
REMOTE HIGH FREQUENCY UNIT TO OBTAIN TORCH CABLE LENGTH OF 22M
ANALOGIC INTERFACE FOR CUTTING PANTOGRAPHS
415/440V 50/60 Hz
|Three phase input|
|Fuse rating (slow blow)|
|27 KVA 40%
22 KVA 60%
16 KVA 100%
|20A ÷ 160A||Current adjustment range|
120A 60%95A 100%
|Duty Cycle (10 min.40°C)
According to IEC 60974.1
|Thickness on steel: Recommended- Max.-(Severance)|
|220 lt/min – 5 bar||Air consumption|
|IP 21 S||Protection class|