Cebora TIG 1640 DC-HF 230V Welding Machine

In TIG Welding mode, the arc is started either in HF or with the Cebora lift system.
It features a 2 stage/4 stage selection key, while the remote control device allows to connect a foot control or, alternatively, to work with a torch fitted with an up/down control.
The welding current can be adjusted from 5 to 160 A and two potentiometers allow respectively the slope down and the post-gas function adjustment. This power source represents the entry level model in the complete range of Cebora DC TIG welding power sources and is mainly intended for maintenance and repair work, as well as for small productions.
The compliance with EN 61000-3-12 brings substantial energy saving and a wide supply voltage tolerance (+15% / -20%).

The power source can be powered by motor generators of adequate power (Min. 6 KVA).

TIG	MMA
	230V 50/60 Hz + 15% / -20%		Single phase input
	16 A		Fuse rating (slow blow)
	3,4 KVA 40% 2,7 KVA 60% 2,2 KVA 100%	4,6 KVA 30% 3,5 KVA 60% 2,8 KVA 100%	Input power
	5A ÷ 160A	10A ÷ 140A	Current adjustment range
	160A 40% 135A 60%110A 100%	140A 30% 115A 60%95A 100%	Duty Cycle (10 min.40°C) According to IEC 60974.1
	IP 23 S		Protection class
	10,3 Kg		Weight
	171x420x340H		Dimensions mm