Description
CEBORA TRI STAR 1636 M INVERTER SYNERGIC MULTI PROCESS MIG-MAG
Call Now For Best Prices 01276 505012
The Cebora TRI-STAR 1636 M is a multi-purpose inverter power source, suitable for MIG, TIG (with Cebora lift ignition) and MMA (stick electrode) welding. This single phase power source has been the product of development by Cebora, to apply the concepts of mobility and multi-purpose to welding. A front panel, simple and user friendly control unit allows quick process selection, displayed clearly (MIG/MAG, MMA and DC TIG).
In the MIG/MAG mode, it is possible to assign a pre-programmed synergic curve to the wire type and diameter as well as the shielding gas to be used. 11 Synergic curves are available in menu and are optimized for steel (Ø 0.6 – 1), stainless steel (Ø 0.8), aluminium (Ø 1), MIG brazing (Ø 0.8) and flux cored wire (Ø 0.9). The synergic programs for steel allow working with either mixed gasses or 100% CO2. Fine tuning of arc length is possible via a dedicated control. The MIG/MAG torch is specific for this power source and is also available in a special version for use mainly with flux-cored wire (art.1636).
In MMA welding mode, electrodes of up to Ø 3.25 can be welded with the Cebora Tri Star 1636 M power source.
The Tri Star 1636 features a compact design and has a low weight. The power source is capable of multiple processes making it perfect for maintenance, repair, installation and on site welding. It also makes a great workshop too.
The low electrical input from a single phase supply make the use of this machine possible in a wide range of the environments.
The compliance with EN 61000-3-12 brings substantial energy saving and a wide supply voltage tolerance (+15% / -20%).
The power source can be powered by motor generators of adequate power (Min. 6 KVA).
Art. | 298 | Specifications | ![]() |
||
---|---|---|---|---|---|
MIG/MAG | DC TIG | MMA | |||
![]() |
230V 50/60 Hz
+15% / -20% |
Single phase input | |||
![]() |
16 A | Fuse rating (slow blow) | |||
![]() |
4,5 KVA 35%
3,4 KVA 60% 3,0 KVA 100% |
4,5 KVA 35%
3,4 KVA 60% 3,0 KVA 100% |
4,0 KVA 60%
3,7 KVA 100% |
Input power | |
![]() |
15A ÷ 160A | 5A ÷ 160A | 10A ÷ 130A | min.-max. current that can be obtained in welding | |
![]() |
160A 35% 130A 60%120A 100% |
160A 35% 130A 60%120A 100% |
130A 60% 120A 100% |
Duty Cycle (10 min.40°C) According to IEC 60974.1 |
|
![]() |
ELECTRONIC | Stepless regulation | |||
![]() |
0,6/0,8/1 Fe 1,0 Al 0,8 Inox/ Cu-Si 3% 0,9 Cored |
– | – | Wire size that can be used | |
![]() |
Ø 200 mm / 5 Kg | – | – | Max. wire spool size | |
![]() |
– | – | Ø 1,5 – Ø 3,25 | Electrodes that can be used | |
![]() |
IP 23 S | Protection class | |||
![]() |
13 Kg | Weight | |||
![]() |
207x437x411H | Dimensions mm |
Reviews
There are no reviews yet.