Mosa DSP 500 PS/EL Diesel Welder Generator
Call Now For Best Prices 01276 505012
The DSP 500 PS/EL diesel welding generator uses chopper technology in this MOSA built machine. With 500 amp DC Welding output and a large fuel tank with 14 hour run time, this is a heavy duty machine for industrial use. All driven by a diesel water cooled engine providing a multi voltage 16 kVA generator output.
Features WDC (Welding digital control) and designed for rigorous welding applications. This welder generator is from a range of heavy duty, multi process welder-generators, made by MOSA. Heavy duty construction with a solid chassis and roll bar, also with a long run time on one tank of fuel. Offers 5 welding programmes for contact TIG DC, MMA Stick with 3 Arc Force settings including cellulose pipe electrodes plus a programme for CV MIG welding using the optional MOSA WF4 wire feed unit.
The engine driven Mosa welder DSP 500 YSX is a Constant Current (CC), Constant Voltage (CV) professional machine with electronic control of the welding current. CC and CV welding output modes are selectable:
- In Constant Current (CC) Mode, it is possible to choose between a characteristic with adjustable arc force, suitable for MMA and TIG welding (With Scratch Start).
- In Constant Voltage (CV) mode it is possible to MIG weld using the optional WF4 Mosa Wire Feed Unit. Capable of Wire welding both Solid and Flux Cored wires.
The DSP range of engine driven welders operate at high frequency using the Digital Signal Processor. The welding voltage or current is controlled, cycle by cycle,using patented technology. An innovative microcomputer within the machine is programmed with this sophisticated software. This DSP technology creates an extremely stable output of welding current or voltage by almost instantaneous control of the welding parameters.
All of this is achieved using just four main components; A HALL sensor very accurately measures the welding current, a small reactance and a chopper diode bridge which is controlled by the digital welding control.
There is also a power change-over switch which allows for polarity change if this is a desired option. A special programme makes this possible.
The DSP series provides a very high quality welding output. Very few component parts reduces the number of required connections to a minimum so increasing this output further more.
Suggested applications for this engine driven welder include; mining and quarrying, pipeline construction, ship repair & construction, steel fabrication and construction, steel fabrication and construction, refinery and petrochemical construction, heavy plant maintenance and shutdown.
The Welding Digital Control functions include; GTAW (Gas Tungsten Arc Welding – TIG), SMAW (Sheilded Metal Arc Welding), GMAW (Gas Metal Arc Welding – MIG), FCAW (Flux Cored Arc Welding).
This series of Welder Generators are a complete power solution. Mains welding or cutting machines can be powered directly from this DSP series of machine driven welders using AC Multi voltage auxiliary power.
EEC NOISE COMPLIANT.
SMAW (STICK)/ GTAW (TIG) CC (Constant Current)
- Current range: 10 – 500A
- Duty cycle: 500A – 35%, 450 A – 60%, 400A – 100%
- Open circuit voltage: 62 V
GMAW (MIG)/ FCAW (FLUX CORED) CV (Constant Voltage)
- Voltage range: 16 – 40V
- Duty cycle: 450A 60% – 400A 100%
Welding Cable Set, Remote Control, CC/CV MIG Wire Feed Package, Tig Torch Package, Parallel Box Kit, Two Wheel Site Tow, Two Wheel Road Tow, Service Filter Kit, Spark Arrestor/Chalwyn Valve.
|AC Generation – Three Phase||16 kVA/400V/23.1A|
|AC Generation – Single Phase||12 kVA/230V/52.2A|
|AC Generation – Single Phase (Option)||6 kVA/110V/54.5A|
|DC Welding – Stick/Tig – CC – Range||10 – 500 Amps|
|DC Welding – Stick/Tig – CC – O.C.V.||60V|
|DC Welding – Stick/Tig – CC – Duty Cycle||500A@35% – 450A@60% – 400A@100%|
|DC Welding Mig/Flux Core – Voltage Range||16-44V|
|DC Welding Mig/Flux Core – Duty Cycle||450A@60% – 400A@100%|
|Engine Type – Diesel – 4 Stroke||PERKINS 404 C-22G|
|Engine Output||20.3 kW (27.6 HP)|
|Engine Speed||1500 rpm|
|Fuel Consumption||243 g/kWh|
|Fuel Tank Capacity||60 Litres|
|Running Time (60% Duty Cycle)||15 Hours|
|Noise Level||94 LWA (69 dB(A) – 7m)|
|Dimensions L x W x H (mm)||1720 x 980 x 1110|