PARWELD XTS 166 RC DUAL VOLTAGE STICK WELDER
The Parweld XTS 166 remote control stick welder is ideal for site work. A 110V stick welder, also capable of running from 230V for maximum flexibility. The addition of a remote control on a 4m lead allows the user to adjust amperage remotely from the machine, excellent for welding at height or in confined areas where having the machine next to the job isn’t possible/ideal.
Its small size and light weight make it perfect for mobile applications where the machine can be kept in a van etc. Similarly, these units are equally suitable for home use.
Arc force and hot start technology makes striking and re striking electrodes easy. Hot start increases current during arc initiation to get the weld started, whilst arc force kicks in if the arc distance becomes too short helping to stop the electrode sticking during the weld.
The Parweld XTS 166 RC is generator friendly too, capable of coping with power inputs with a fluctuation tolerance of ± 15%.
Lift start TIG welding can also be done with the XTS 166 RC using a basic TIG torch with manual gas valve – see related products. Using a suitable gas supply TIG welding of steel and stainless steel is possible (40A minimum). Lift start TIG limits the arc current when the tungsten touches the work piece preventing electrode damage. Simply touch the work piece to get the arc started and then lift slightly before welding.
- 110V / 230V single phase
- 160A @ 40% duty cycle (230V)
- 35-50 dinse connections
- Supplied with 3m electrode holder lead, 3m earth lead with clamp and 4m remote control pendant.
- Weld up to 4mm steel
- Welds rutile, basic and cellulosic electrodes
- Lightweight – just 4.8kg
- Digital amperage display
- Over voltage and over current protection
- Built in electrode anti sticking
- 81V no load voltage
- 3 year return to base warranty
- Manufactured to IP23S, ISO/IEC 60974-1, ISO/IEC 60974-6 and RoHS Compliant
SUPPLIED WITH: Power source with 3m electrode holder lead, 3m earth return lead with clamp, 4m remote control pendant, 3m mains input lead, operating instructions
NOT SUPPLIED: Equipment for lift TIG: TIG torch, SS2G Argon Regulator (see related products below)
|Input Supply 50/60Hz||Fuse amps||Amperage range||Max electrode size||Enclosure protection||Duty Cycle||Dimensions / Weight||Generator requirements (+/-15%)|
|10 – 160A
10 – 125A
|4mm||IP23S||160A @ 40% (230V)||375 x 140 x 245 mm / 7.0kg||6kVA|
WARRANTY AND SUPPORT
The Parweld XTS 166 RC comes with a 3 year warranty which is upheld by their large UK headquarters situated in the West Midlands.