Home » Welding Supplies » TIG Welding Supplies » TIG Torches » Starparts WP26 TIG Torch to Suit Jasic MIG 200 Synergic

Starparts WP26 TIG Torch to Suit Jasic MIG 200 Synergic

£110.00 ex VAT

Further Reductions Available On Request 01276 505012

  • Euro connector
  • WP26 Style
  • Suits Jasic MIG 200 Synergic
SKU: WP26-12JE Categories: , Tag:

Description

STARPARTS WP26 TIG TORCH WITH EURO CONNECTOR (SUITS JASIC MIG 200 SYNERGIC)

A Starparts brand WP26 TIG torch suitable for connection to the Jasic MIG 200 Synergic welding machine to make use of the Lift TIG functionality.

 

12.5ft in length, the torch has a euro connector seen on many MIG welding machines.  The connection by euro connector makes use of the machines gas solenoid for automatic shielding gas delivery.  The user can also make use of the pre and post flow functionality in TIG, adjustable from the machines interface.

 

INSTRUCTIONS

  • Switch the welding mode selection switch to “TIG”.
  • Select the desired operating mode using the 2T/4T switch key.
    • 2T: After pressing down the torch trigger, gas flows for the pre-flow time, and then welding begins. Initially, the arc is ignited by touch and lift at low current. The current rises to the initial current, and then it increases gradually (according to the upslope time) to the preset current. After releasing the torch trigger, the current drops gradually (according to the downslope time) to “0”, and welding ends.
    • 4T: After pressing down the torch trigger, gas flows for the pre-flow time, and then welding begins. Initially, the arc is ignited by touch and lift at low current. The current rises to the initial current, and then it increases gradually (according to the upslope time) to the preset current. The torch trigger can be released during welding. When pressing down the torch trigger again, the current drops gradually (according to the downslope time) to the pilot arc current. After the torch trigger is released, gas keeps flowing for the post-flow time, and welding ends.

 

  • Select the correct welding current using the current control knob according to the thickness of the workpiece, and the current display window displays this preset value. Set the downslope time through the downslope time control knob.

 

A basic TIG torch with a manual gas valve can also be used with the Jasic MIG 200 synergic.

Spare TIG torch parts are available.

Reviews

There are no reviews yet.

Be the first to review “Starparts WP26 TIG Torch to Suit Jasic MIG 200 Synergic”